Beta85X comes with the upgraded function which can support 4S for FPV racing with low latency.Perfectly suitable for racing. Fully enjoy the powerful explosive force and awesome flight experience that the drone bring to you!The built-in FrSky receiver can make it easily to bind to all FrSky transmitters.Please refer to the manual for more information about the binding process.

Fast and powerful with the 1105 5000KV motors. Updated F4 V2 4S FC and BLHeli_32 ESC, which are used single N-channel MosFETs, soldered with 25V/220uf electrolytic capacitor, will definitely give you much more power, enable you to fly on 450mAh 4S battery safely.Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with EOS2 camera in racing or freestyle on 4S power.

With the high performance STM32F051K66 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power.

Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.

Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.

Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to fly on 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.

450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

BULLET POINT

• With the intergrate of the FrSky receiver, you can bind to all FrSky radios and have better control.
• Beta85X pushes the new era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with EOS2 camera in racing or freestyle on 4S power.
• With the high performance STM32F051K66 processor FC boards and tuned Betaflight OMNIBUSF4SD (OBSD) , faster input signals with lower latency and higher update rate are reachable, give you much more power. 
• Comes with upgraded F4 V2 4S FC, this FC is equipped with ports which support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
• Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
• Upgraded 1105 motor from 6000KV to 5000KV, with a light weight but definitely will give you extreme power and speed to fly on 4S. Motor comes with cable connectors. Just plug and play. EMAX Avan 2" prop is the best combo in this Beta85X drone.
• 450mAh 4S high rate battery is recommended by default. But pilot could also use their own batteries with battery strap. Optional and affordable.

For 85mm brushless whoop drones, there are 3 versions for your choice - Beta85X FPV, Beta85X HD and Beta85X 4K.

 

SPECIFICATION

• Weight: 68.0g (without battery)
• Receiver: Frsky XM+ / RXSR
• F405 Flight Controller & 16A BLHeli_32 ESC V2.0
• Motors: 1105 5000KV with connector
• Props: EMAX Avan 2" 4-Blades Props
• FPV Camera: Customized EOS2 Camera
• FPV Canopy: Canopy for EOS2 Came
• Battery: 4S 450mAh Battery (Not including)
• 5.8G FPV antenna
• Flight time: 4min - 6min with 450mAh 4S battery (smooth flight in a windless environment)

 

FC SPECIFICATIONS

• CPU: STM32F405
• Six-Axis: MPU6000
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: Betaflight OMNIBUSF4SD（OBSD）
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

• Support BLHELI_32
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
• Input voltage: 3-4S lipo
• Cotinue current: 16A
• Peak current: 19A 
• Firmware target: BETAFPV-16A-32bit
• MCU: STM32F051K66

PARTS UPDATED

This Beta85X has upgraded in every individual parts likd FC, ESC, Motor, etc. Which can support 4S power with a steady performance and bring you into a glorious FPV world.

F4 V2 FC

• Extra 4 pluggable ports for ESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.

Including

• 1* Beta85X Whoop Quadcopter(4S)

There are no batteries included for all version. High recommend the 450mAh 4S battery.