For a drone to operate effectively and efficiently one needs a best Betafpv f4 brushless flight controller flight especially beta models. The controller is what integrates all the electronic functions of flying from the receiver to the transmitter commands, ESC and OSD among others. 

Therefore one needs an FC that understands their needs as a pilot. This is why we are going to talk about the BetaFPV F4 brushless Flight controller. Without wasting time let’s jump right in and learn more about the FC.

Best BetaFPV F4 brushless FC Controllers

The beta FPV F4 is one of the best controllers in the market. The FC has been built to fit your needs as a pilot which makes the controller a vital part of your Whoop drone. 

To understand the F4 Controllers we will look at the various brands it has to offer.

1.F4 1- 2S AIO Brushless Flight controller 

The FC controller is suitable for lighter 1-2S drones. It works efficiently in the aircraft to produce perfect results when flying the drones. For example, Beta75 Pro 2 or Beta65 Pro 2 is ideal for the FC.

The controller is integrated with a Betaflight F411 processor FC, 1-2S 5A ESC, and SPI Frsky receiver. When one uses the FC on the drone it saves space which makes the 1-2S drones lighter and faster. This gives one the most out of their drones.

Moreover, the Controller is also available for 1S whoop drone. Though you will need to solder JST-PH 2.0 Cable in wires solder pad. This replaces the initial power cable. Besides that, you will also need to use higher 12000KV motors. You could opt for 0802 17500KV or 19500KV motors which provide you with more power.

Features of the Flight controller 

  • Firmware version: betaflightˍmatekf411rx ˍ4.0.0 (Development Version)
  • Size: 26mm* 26mm, which is fully compatible with all whoop drones mounting pattern. We recommend the FC for Beta75 pro frame and Beta65X frames
  • CPU: STM32F411CEU6 (100MHZ)            OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)     
  • Power Cable: 55mm, with 2pcs JST-PH 2.0 connector, AKA PowerWhoop connector
  • Weight: 4.5 g
  • Built-in SPI Frsky D16 protocol native receiver, compatible with almost all Frsky FCC radios.   

ESC features 

  • Signal Support: D-shot 150, D-shot300, D-shot600,Multishot,PWM,Oneshot125.
  • Support BLHeliSuite programmable
  • Power supply: 1-2S
  • Built-in ESC with 5A continuous peak 6A current
  • Factory firmware: SˍHˍ50ˍREV16ˍ7.HEX

2.BETAFPV F4 1S Brushless Flight Controller V2.1 DSMX

The controller has a DSMX Receiver 5A ESC OSD Smart Audio with BT2.0 connector. Additionally, the controller is meant for FPV 1S brushless Tinywhoop Micro Whoop Drone FPV. For example, Beta75Pro and Beta65 Pro Quadcopter will work perfectly with the controller. 


  • It weighs 2.69 which makes the drone lighter and faster
  • It is compatible with Z01, A01, and M01 VTX
  • CPU: STM32F411CEU6 (100MHZ)
  • Six-Axis: MPU-6000 triaxial accelerometer/triaxial gyroscope (SPI connection)
  • OSD: Built-in BetaFlight OSD (STM32 controls with an OSD chip over SPI in DMA mode)
  • Size: 29mm*29mm which is fully compatible with the whoop frame such as Beta75 Pro Frame, Beta65 Pro Frame, BWhoop B06 frame.
  • Firmware version: Betaflight MATEKF411RX (MK41R)
  • Power cable: 60mm, which comes with a BT2.0 connector, 1.25mm motor header pins No Rx 

ESC specifications

  • Current: 5A continuous and peak 6A (3 seconds) 
  • Support BLHeliSuite programmable
  • Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, PWM, and Multishot
  • Power Supply: 1S
  • Factory firmware: OˍLˍ5ˍREV16ˍ6.HEX 

3.FPV F4 F405 V2 Brushless Flight controller  

This is another fight controller one can opt for. It comes with various features which makes it ideal for your drone. Let’s look at some of the amazing features.


  • CPU; STM32F405 (Overclock to 240mhz) 
  • Firmware version; Betaflight OMNIBUSFASD (OBSD)
  • Six-Axis: MPU6000
  • It comes with RX3 and TX3 which has an auto inverter. This supports all RX
  • It has Buzzer solder pads
  • Size:26mm*26mm, whoop mounting pattern
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • TX1 and RX01 ports which are available for Frsky F-port, DSM2 or DSMX
  • It weighs 4.2g
  • Support programmable LED such as WS2812 among others    


BETAFPV F4 brushless flight controllers are the best since they are light and offer maximum power to the drone. When using the FC you will have an extreme piloting experience, plus one gets the most out of their drones. This is why we have assembled some of the best FC controllers for your aircraft.