The Best Selection Of FRSKY Futaba Receivers Complatibles With Them
1st In this article I am going to talk about some receivers compatible with this transmitter so that you can see some of them
2nd Frsky TFR6-TFseries compatible with futaba FASST
Its Compatibility is:
FASST 2.4G Air Systems (7CH Mode / Multi Mode ): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, 14SG, 18SZ etc
Specs:
- Number of channels: 7
- Operating voltage range: 3.5V ~ 10V
- Operating temperature range: -10 ℃ ~ 60 ℃
- Dimensions: 37 * 22 * 8mm
- Weight: 7.8g
features
- Lighter weight and physically smaller.
- Two Fail Safe configuration modes .
3. Configuration :
Bind procedure :
Turn on the transmitter, connect the battery to the receiver while pressing the F / S receiver button. After the RED LED is off and the GREEN LED is solid, the pairing process is complete and the receiver is working normally.
Fail safe configuration :
TFR6 supports two Fail Safe configuration options , either using the native Fail Safe position preset on the transmitter side, or the Fail Safe of the TFR6 receiver itself.
FAILSAFE From the transmitter:
The TFR6 will use native failsafe position setpoint on the transmitter side.
Set FAILSAFE in TFR6:
The TFR6 supports the failsafe function for all channels. Follow the steps below to set the TFR6 security mechanism:
- Link the receiver first, and disable failsafe on the transmitter side;
- Set all transmitter controls to desired fail-safe position;
- Briefly press the F / S button on the receiver, the green LED on the receiver will blink twice, indicating that the safety mechanism is configured correctly.
Frsky TFR6M Series
Its compatibility is this: FASST 2.4G Air Systems (7CH Mode / Multi Mode ): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, 14SG, 18SZ etc
Specs:
- Number of channels: 6
- Operating voltage range: 3.5V ~ 10V
- Operating temperature range: -10 ℃ ~ 60 ℃
- Dimensions: 31 * 23 * 7mm
- Weight: 3.4g
features
- Lighter weight and physically smaller.
- Two Fail Safe configuration modes .
2. Configuration:
Bind procedure :
Turn on the transmitter, connect the battery to the receiver while pressing the F / S receiver button. After the RED LED is off and the GREEN LED is solid, the pairing process is complete and the receiver is working normally.
Fail safe configuration :
TFR6 supports two Fail Safe configuration options , either using the native Fail Safe position preset on the transmitter side, or the Fail Safe of the TFR6 receiver itself.
FAILSAFE From the transmitter:
The TFR6 will use native failsafe position setpoint on the transmitter side.
Set FAILSAFE in TFR6:
The TFR6 supports the failsafe function for all channels. Follow the steps below to set the TFR6 security mechanism:
- Link the receiver first, and disable failsafe on the transmitter side;
- Set all transmitter controls to desired fail-safe position;
- Briefly press the F / S button on the receiver, the green LED on the receiver will blink twice, indicating that the safety mechanism is configured correctly.
Frsky TFR6-TF Series
Its compatibility is FASST 2.4G Air Systems (7CH Mode / Multi Mode ): 6EX, 7C, TM-7, TM-8, T8FG, T10C, TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, 14SG, 18SZ etc
Specs:
- Number of channels: 7
- Operating voltage range: 3.5V ~ 10V
- Operating temperature range: -10 ℃ ~ 60 ℃
- Dimensions: 37 * 22 * 8mm
- Weight: 7.8g
features
- Lighter weight and physically smaller.
- Two Fail Safe configuration modes .
Setting:
Bind procedure :
Turn on the transmitter, connect the battery to the receiver while pressing the F / S receiver button. After the RED LED is off and the GREEN LED is solid, the pairing process is complete and the receiver is working normally.
Fail safe configuration :
TFR6 supports two Fail Safe configuration options , either using the native Fail Safe position preset on the transmitter side, or the Fail Safe of the TFR6 receiver itself.
FAILSAFE From the transmitter:
The TFR6 will use native failsafe position setpoint on the transmitter side.
Set FAILSAFE in TFR6:
The TFR6 supports the failsafe function for all channels. Follow the steps below to set the TFR6 security mechanism:
- Link the receiver first, and disable failsafe on the transmitter side;
- Set all transmitter controls to desired fail-safe position;
- Briefly press the F / S button on the receiver, the green LED on the receiver will blink twice, indicating that the safety mechanism is configured correctly.
-
Posted In:
- News