1 º I am going to show some frsky products introduction   such as a transmitter or receiver, modules etc. so that you can read some of the possible future purchases and that they are very good for my opinion I hope you like them and leave doubts with any of the products that I put you here.

 

2 º The taranis X9E transmitter  this radio is an evolution of the very popular frsky taranis plus with several improvements, in addition to its tray type design. The most important aspect for any transmitter is maintaining a secure connection with the receiver. FrSky is well known for ACCST frequency hopping technology .

 

FrSky knows that many things can affect the connection between the transmitter and the receiver, which is why  it  incorporates RSSI (Receiver Signal Strength Indicator) in all telemetry receivers .

3 º The Taranis X9D has been designed in order to meet the needs of drivers of all categories in terms of features, and comes natively with the latest technological advances in communications, digital radio . It has a multi- language support This Radio is per-configured in English, French version easily download .

 

4 º The frsky R-XSR receiver is a reduced version of the FrSky XSR receiver . The R-XSR is a standalone receiver with all the functions of XSR, in addition, it is almost 1/3 the size and 1/3 the weight of the XSR receiver. Also, the redundancy function is built into this little receiver, and the IPEX connector makes it more convenient for you to replace the antennas. 

 

5 ºEl receptor FRSKY Rx6r is an independent receiver with all the functions of the X6R presents six PWM outputs with high accuracy and low latency. The PWM output latency is 9 ms lower than the X6R in high speed mode. The RX6R also supports redundancy function, this means you can add another receiver as a backup in case the first one fails. Last but not least, the RX4R and the entire RX line have 40% more operating range compared to previous X-series receivers. 

 

6 º The frsky XHT RF module  is without housing, it has two automatically detected modulations of PXX or CPPM. It also has three selectable modes of D8 , D16 , and LR12 that works for all types of transmitter. It has an enabled Smart Port and compatible telemetry data transmission. Its operating frequency is RF: 2.4GHz, it has an output power: ≤ 100mW.

 

7 º The RB40 uses all the trustworthy attributes of the previous redundancy bus series along with the addition of new features to meet the needs of an ever-growing range of users. The RB40 is an extensive sensor module with a built-in gyroscope that supports model stabilization functions and includes other diversified telemetry feedback such as voltage, power consumption, altitude, and much more.  

8 º Fr Sky VANTAC Swoop SQ130 BNF130mm that has a wheelbase, FPV Racing   RC Drone . Is the last Multirotor of FRSKY that emerge of our team riders. No corners were cut when putting together this ready-to-fly 3- inch machine . 

 

F.PORT 2.0 PROTOCOL O Running the latest low latency F.Port 2.0 connection enables a clean single signal cable for all your control and telemetry needs, and parameters are fully adjustable via flight controller and Lua Script via F.Port 2.0.  

THE QUALITY , COMPATIBILITY and EXTENDIBILITY  Swoop SQ130 has a lightweight and quality airframe, extremely durable construction made with a high quality carbon fiber frame, ideal for FPV racing.

9 º FrSky F.Port 2.0 CH4 / 6/8 multichannel extender

This F.Port2.0 multichannel extender is a tool specifically designed for receivers with a single F.PORT 2.0 signal output . With the extender attached, exact servos with f.port 2.0 firmware installed can now be controlled and configured by any f.port 2.0 compatible

10 º FrSky Compact XSR-SIM USB Dongle for FrSky transmitters and module system

The FrSky Wireless USB Dongle For Simulator allows you to witlessly connect your FrSky transmitter to the computer to use the simulator. Just install the preloaded HID driver on your PC (Mac users will need to download the correct HID drivers). Then tie your transmitter to it, now you can move freely while using a simulator .