FrSky Apus MQ60 V2 and X Lite S Transmitter combo

FrSky Apus MQ60 V2 and X Lite S Transmitter combo

Click on above image to view full picture

FrSky Apus MQ60 V2 and X Lite S Transmitter combo

$219.98 $199.99

Status: In stock

* Required Fields

$219.98 $199.99

Apus MQ60 V2 Description

Versus the V1, the new Apus MQ60 V2 has the improved power performance. The built-in FrSky XMF3EM flight controller also supports 2 methods (automatic & manual) of the binding process for all FrSky transmitters and let you have the better control. The lightweight design, measuring 66.5mm at the wheelbase and 20g of weight means it’s convenient to take anywhere. The solid frame and the strong motor protection ensure you’ll stay in the air in the most demanding indoor environments.

Note: Here is the battery connector picture:  ( battery Spec: 3.7V 200mAh - 220mAh 25C Li-Po )

Improvement from V1

  • Improved power performance (6×15mm 19000KV brushed motor)
  • Better flight control
  • Longer flight time

Specifications:

  • Model name: Apus MQ 60 V2
  • Wheelbase: 66.5mm
  • Weight: 20g (Without battery)
  • Size: 84mmx 84mmx58.5mm
  • Flight controller integrated with XM receiver
  • Firmware version: betaflight_3.3.0_frsky(can be upgraded)
  • Motor: 615 coreless
  • Prop Size: 31mm 3 blades props
  • Camera: NTSC 672X492
  • Video Transmitter: 5.8G 26CH 25mW

Features:

  • Lightweight
  • 5 minutes of flying time
  • Support 2 binding modes (automatic and manual)
  • Solid frame and strong blade protection
  • Fly without having to adjust the parameters after binding
  • Supports parameter adjustment and the default value recovery

 

X Lite S Description

With the growing acclaim of the new compact X-Lite form factor, FrSky is introducing this upgraded version. The Pro and FrSky X-Lite S versions combine all the benefits of the preceding design with the features of our full-sized radios, along with the newly developed ACCESS (Advanced Communication Control, Elevated Spread Spectrum) protocol.

Checking the airwaves for RF noise is now possible with the new spectrum analysis function added to the OpenTX firmware. FrSky X-Lite S version features the addition of a PARA wireless trainer function which makes them compatible with the FrSky Free Link App and AirLink S. The best thing about S model is that pilots can now expect even lower latency and enhanced performance due to our new ACCESS transmission protocol. With the integrated 6-axis sensor unit, pilots can use the radio as a motion-sensing controller to control the inputs of a model during flight or use it to point a camera in the desired direction. Like all of our transmitters, all of the beloved features from previous Taranis are included such as full haptic feedback and voice alerts, as well as telemetry and 24 channels and an additional 2 momentary buttons are installed.

***Pls.be noted:

The X, XM, RX, GX series receivers can be gradually upgarded to ACCESS protocol. It includes XM, RXSR, RX4R, RX6R, G-RX6, G-RX8, XM Plus, and R9 series. For more details about ACCESS, pls. visit: https://www.frsky-rc.com/frsky-advanced-communication-control-elevated-spread-spectrum-access-protocol-release/

 

Specifications

  • Number of channels: 24 channels
  • Internal RF module: ISRM-S
  • Weight: 308g / 376g (with battery)
  • Operating voltage range: 6.0 ~ 8.4V
  • Operating current: [email protected]
  • Operating Temperature: -20°C ~ 60°C (-4°F ~ 140°F)
  • Backlit LCD resolution: 128*64
  • Model memories: 60 models (expandable by micro TF card)
  • Micro USB interface: supports 2S Li-battery balancing charge
  • Compatibility: ACCESS and ACCST D16 mode receivers

Features

  • Ergonomic and compact design
  • M12 Lite hall sensor gimbals
  • With installed ACCESS protocol
    • Lower latency (down to 12ms)
    • High-speed digital interface of internal and external modules (Baud rate: 450K)
    • Supports spectrum analyzer function
  • New PARA wireless training system
    • High-speed training system with a lower latency
    • Compatible with FrSky Free Link App and AirLink S via mobile devices
  • Supports wired training function
  • High-efficiency quick-charge system
    • Supports 2S Li-Battery balancing charge
  • Supports motion sensing control
    • Integrated with 6-axis sensor unit
  • Haptic vibration alerts and voice speech outputs


PACKAGE INCLUDED

  • 1x Apus MQ60 V2
  • 1x X Lite S Transmitter