BETAFPV HX100 100mm FPV Quad built in FrSky XM+ Receiver

BETAFPV HX100 100mm FPV Quad built in FrSky XM+ Receiver

Click on above image to view full picture

BETAFPV HX100 100mm FPV Quad built in FrSky XM+ Receiver

$119.99

Status: In stock

* Required Fields

$119.99

HX100 - a revolutionary pocket-size FPV racing drone, is suitable for indoor and outdoor flight. Take it home and explore the big world. Unleash your other side!  It's the first generation of carbon fiber kit of Betafpv without the ducting design so although not designed for novice pilots, the HX100 is so much more responsive and quick with not having the ducting around the motors. Other features include 65mm/48mm props, F4 2-4S AIO 12A FC1103 8000KV motor, and a Runcam Nano V2 FPV Camera.The built-in FrSky XM+ receiver can make it easily to bind to all FrSky transmitters.Please refer to the manual for more information about the binding process.

BULLET POINT

  • HX100, a 100mm small-size Toothpick carbon fiber drone, also the first carbon fiber drone of BETAFPV, small but contains much power, enable you to enjoy the indoor fun and explore the outdoor excitement.
  • Comes with F4 2-4S AIO 12A FC, possesses high performance STM32F411CEU processor and tuned Betaflight MATEKF411 (MK41), provides much more power on 3S.
  • With durable and light enough carbon fiber frame. A total weight of 43.7g gives pilots a good balance of weight and nice punch on 3S battery, which leads to a awesome flight performance .
  • Whole drone no soldering or tinkering necessary. Customized light 1103 8000KV motors with strengthened cable connectors. It is more thicker which will not easy to break off. Just plug and play. 
  • Two set of props for you to choose, bring you different flight experience. Highly suggest to use 48mm 4-blade props with 300mAh 3S battery and 65mm 2-blade props with 300mAh 2S battery, switchable and affordable. 

 

SPECIFICATION

  • Weight: 42.5g (without battery)
  • Receiver: FrSky XM+
  • FC&ESC:F4 2-4S AIO 12A FC
  • Motors: 1103 8000KV with connector
  • Props: 65mm 2-blade props(1.5mm shaft hole) / 48mm 4-blade props (1.5 mm shaft hole)
  • Camera: Runcam Nano V2
  • VTX: A01 25-200mW 5.8G VTX
  • Frame: HX100 carbon fiber frame
  • Canopy: Canopy  for HX100
  • Battery:300mAh 3S Battery / 300mAh 2S Battery
  • Flight time: Almost 2mins


F4 2-4S AIO 12A FC 

Find more details about this F4 2-4S AIO 12A FC board in another page.

Receiver

  • Style:XM+
  • Dimension:21.5x12x3.5mm(LxWxH)
  • Weight: 1.6g
  • Number of Channels:Up to 16CH from SBUS(CH1~CH15 for PWM, CH16 RSSI for FC)
  • Operating Voltage Range:3.7~10V
  • Operating Current:[email protected]
  • Operating Range:FULL range
  • With RSSI output on board:Analog 0~3.3V
  • Firmware Upgradeable
  • Compatibility:FrSky D16 mode

FC

  • CPU: STM32F411CEU6 (100MHZ )
  • Six-Axis: MPU6000 (SPI connection)
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight MATEKF411 (MK41)
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Receiver: Support Frsky XM+ Receiver
  • Support programmable LED like WS2812 etc
  • Built-in current sensor Weight: 5.6g

ESC

  • Support BLheli/BLHELI_S suite Pass-through ready
  • Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
  • Input voltage: 2S-4S Lipo
  • Continue current: 12A
  • Peak current: 13A
  • Firmware: BLHELI_S
  • Processor: SILABS EFM8BB21F16G
  • Motor Connectors: 1.25mm header pins connector
  • Factory firmware: G-H-30-16.7

Runcam Nano V2 Camera and A01 VTX

The Runcam Nano V2 is a 1/3" 700TVL CMOS FPV camera, a perfect match with HX100. Be able to transfer the instant image and provide high quality video.

Besides that, the newest A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

  • Output power: 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
  • TV System: NTSC/PAL
  • Image Sensor: 1/3" CMOS
  • Horizontal Resolution: 700TVL
  • Lens: 2.1mm(M8) FOV 155°

RECOMMEND BATTERY

Highly recommend 300mAh 3S battery and 300mAh 2S battery for this small beast.

How to calculate the highest current the battery could provide? For example, 45C 300mAh 3S battery, the maximum discharge current is about 13.5A.

45C * 300mAh = 13.5A.

 Power  Props  Recommend Battery   Voltage 
 2S  65mm 2-blade (1.5mm shaft hole)   300mAh 2S Battery  7.4V
 3S  48mm 4-blade (1.5mm shaft hole)   300mAh 3S Battery  11.1V

Note:HX100 comes with 48mm 4-blade (1.5mm shaft hole) in default, which supports 3S power. If you want to use it on 2S power, please change the props to 65mm 2-blade props (1.5mm shaft hole).


PACKAGE

  • 1 * HX100 100mm FPV Quad(without battery)
  • 1 * Spare set of 65mm 2-blade props

*Battery is NOT included. Highly recommend the 300mAh 45C 3S battery and 300mAh 45C 2S battery.

Customers Who Bought This Item Also Bought

Check items to add to the cart or select all