FrSky XJT Module and X8R receiver combo

FrSky XJT  Module and X8R receiver combo

Click on above image to view full picture

FrSky XJT Module and X8R receiver combo

Please login

Availability: Out of stock

Stock Notification
Email
  Notify me when this product is back in stock
 

FrSky X8R receiver Description

The X8R is in a Smaller package then previous 8 channel receivers, but has so much more capability. The new SmartPort supports the new hub-less sensors as well as the older hub analog sensors.The X8R supports 8 standard servo outputs, and you can access all 16 channels by using the Sbus line with Sbus supported servos or use a FrSky S.BUS Decoder for the full 16 channels. Or you can use 2 X8R receivers in combination and the channels will sync 1-8 on the first and 9-16 on the second.The X8 protocol is also backward compatible! In D8 mode it work with the DHT, DJT, DFT and DHT-U transmitter modules.

Features:

  • More number of channels: 1~8ch from conventional channel outputs, 1~16ch from SBUS port,or combine two X8R to become a 16 channels receiver.
  • Parallel two X8R to become a 16 channel receiver.
  • With RSSI PWM output (0~3.3V)
  • SmartPort enabled, realizing two-way full duplex transmission.

Specifications:

  • Number of Channels: 16
  • Dimension: 46.5mm x 27mm x 14.4mm (1.83" x 1.06" x .56")
  • Weight: 16.8g (.59 oz)
  • Operating VoltageRange: 4V-10.0V
  • Operating Current: [email protected] 
  • Operating Range: >1.5km (FullRange)
  • RSSI output: analog voltage output (0~3.3V)

Compatibility:

  • All 16 channels requires the FrSky Taranis, or the XJT module bound in D16 mode.
    For 8 channels in D8 Mode you can use the FrSky Taranis or XJT, DJT, DFT, DHT and DHT-U modules.

FrSky XJT module Description

Features:

  • Advanced Continuous Channel Shifting Technology (ACCST SYSTEM) achieves highly reliable link in interference rich environments.
  • Smart Port - Full Duplex communication
  • Easy to bind and instant link-up
  • Excellent reboot times
  • All channels failsafe
  • Quick response
  • Very smooth servo movement
  • Alarm on events of receiver (low battery voltages, poor reception, etc.)
  • Error-free link, by using 48bits CRC algorithm
  • Firmware upgradable

Compatibility:

  • V8 Series: (Non-Telemetry receivers) 
    • V8FR-II, V8R7-II, V8R4-II, VD5M
  • D Series: (Telemetry receivers) 
    • D8R, D8R-II, D8R-II Plus, D8RSP, D8R-XP, D6FR, D4FR, D4R-II, etc.
  • X Series: (Telemetry receivers) 
    • X8R, X6R, X4R, etc.
  • LR Series: (Long Range receivers) 
    • L9R

Compatible with the following transmitters:
JR: 347, 388, 783, U8, PCM10, PCM10S, PCM10SX, PCM10IIS, 8103, J9303, MX-22, MX-24S, PX, 9XII, Eurgle 9X, Turnigy 9X and more.

Specifications:

  • Operating Voltage Range: 6.0V-15.0V
  • Operating Current: 140mA (@6V), 80mA (@12V)
  • Output Power: ≤ 100mW